Isokor Whitewood: The most effective method for removing gray from wood Wood located outdoors is subject to a number of biological, physical and chemical influences, which subsequently negatively affect its aesthetic appearance. Long-term exposure to such influences can result in the wood turning gray. The good news is that the graying and wear of wood can be prevented. Unwanted grayness can be removed in several ways, but we bring you the simplest and most gentle. Wood is a natural material, susceptible to moisture, mold, insects, or sunlight. Wood is a living organism and various reactions take place in it that affect the change in the shade of its color. The decomposition of lignin due to UV radiation causes a change in the color of the wood. The combination with the action of water outdoors literally harms its structure. No matter where you have the wood incorporated, it can become a gray „old man“ in a few months. However, nature can help us with this too. Nowadays, we can remove the grayness of wood without serious interference with the structure of the wood and in a natural way. Nature against „gray hair“ Our product range includes a concentrated product for effective, safe and fast removal of gray hair from wood – Isokor WhiteWood. The product effectively and gently removes gray hair from wood and wooden cladding. Isokor WhiteWood is of natural origin and its composition is developed based on fruit extracts. It is harmless to health, environmentally friendly, easily degradable in nature, with an extremely fast effect. You don’t have to worry about damaging the wooden surface with it. We have tested it on a variety of surfaces, without damage. We have only achieved the desired effects of removing gray hair. It is suitable for all known wood species without color treatment or varnish. Don’t complicate your work unnecessarily The common procedure for treating and restoring gray wood is to sand it. A thin surface layer is sanded away, revealing healthy, undamaged wood in its full beauty. However, the process is lengthy and also financially demanding. An easier way to restore the original color of wood is to use a gray remover. Our new Isokor Whitewood is such a product, thanks to which you can remove gray wood perfectly, easily, and the entire process will cost you up to 95% less than the aforementioned sanding. Easy application of the product Everyone can maintain the eternal youth of wood. The advantage of our product is not only its natural composition and the harmlessness of the product, but also its easy application. Before applying, dilute Isokor Whitewood with soft or distilled water. Apply with a brush, spray or roller to the surface you want to clean from gray. Leave for about 30 seconds to 3 minutes and rinse with running water. We are inspired by nature every day To be sure that our products are high-quality, gentle and harmless to health, we constantly test and develop them. We draw on our own experience and try to find the most effective solution to every problem. Our recent „nut“ was to deal with a very common problem that arises with wooden surfaces. Wood can very quickly lose its original shade and turn gray when exposed to external influences, such as UV radiation. We produce our products so that they are ecological and based on nature. Even when trying to produce a product to remove gray from wood, we drew on nature. After thoroughly testing many alternatives, nature provided us with its own effective recipe. We created the product Isokor WhiteWood based on fruit extracts. It has proven to be the most effective and ecological choice. We tested the product on several wooden surfaces. Its application is quick and the result is immediate. Simply dilute Isokor Whitewood with soft or distilled water and apply to the surface you want to clean from gray. After a few minutes of exposure, simply rinse it with water and enjoy its effect! Nature has proven to be the best teacher. All our products are based on natural ingredients, are easily recyclable and environmentally friendly. You no longer have to worry about harmful chemicals from cleaning products. Our products are safe for health and therefore you don’t have to worry about not suitable for use in households with children or pets.
Isokor WhiteWood as an effective weapon against graying wood Gray and graying wood are sought after by many people, as outdated wood looks stylish, especially if the premises are tuned to the „vintage“ style. However, most of us do not want gray wood on garden furniture or gazebos. The good news is that we can very easily treat wood and protect it from graying. Graying of wood is a natural process. It does not represent structural changes, it only has an aesthetic impact. Wood is a living organism that reacts to UV radiation, water, and temperature changes. Damage can also be caused by fungi or insects. Thorough surface protection is therefore an absolute basis for wood to maintain its original color and structure. Not just for a while, but in the long term. We draw on our own experience and have therefore created a gentle product that effectively prevents wood from graying. The composition of the Isokor WhiteWood product is natural and consists of fruit acids. Since it is of natural origin, it does not contain petrochemicals and harmful chemicals that could be harmful to health. The effect of Isokor WhiteWood is much more economical compared to sanding wood, since you can do the treatment yourself. It is easy to use and its effect is immediate. In addition, it is ecological and easily recyclable. It therefore saves not only your wood and financial savings, but also the environment. Our product Isokor WhiteWood can be used to remove gray from any type of wood and wood cladding. It does not damage any known wooden surfaces and is suitable for all known wood species without color treatment or varnish.
We overcome challenges with reason We have already introduced our product Isokor WhiteWood for removing gray from wood. To make sure it works as it should, we constantly test it. The bigger the challenge, the more we look forward to seeing how we can “improve the facade” of older and grayed objects with our products. A few years ago, we treated a larger object in Jihlava. The building was so badly attacked by gray that its exterior was black. We cleaned it by thorough sanding for up to three weeks. Today, we would clean the object much faster and easier thanks to the product Isokor WhiteWood. It is gentle on materials, nature and your wallet. The whole process would take us significantly less time, would have a better result and would have cost us much less money. Fortunately, we know this now and we do not take on graying challenges without Isokor WhiteWood. If you also have a problem with a grayed object, simplify your life and choose an effective and faster method with the preparation Isokor WhiteWood. Applying the preparation is easy. Just a few steps and your object will be like new again. Isokor WhiteWood is a concentrated preparation, composed of fruit acids of the highest quality. It gently, extremely quickly and effectively removes gray from wood. Simply dilute it with soft or distilled water and apply this mixture to the wood. It will restore its original color without damage. It can be used on unpainted or unpainted facade cladding, wooden floors, logs, or any wooden furniture. In addition, it is ecological and therefore gentle not only on your wallet but also on nature. Isokor – Nanotechnology inspired by nature
